Fitment Information
- Nissan 300ZX (1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996)
Specs & Features
- Bolt Pattern: 5/114.3
- Center Bore: 66.2
- Bolt or Stud: Stud
- Thread Type: 12×1.25
- Sold as a pair
- DRM Series
- DRM Series™ spacers bolt to the hub with existing wheel studs and special nuts (included.) Wheel is bolted to new DRM wheel studs.
- DRS Series
- DRS Series™ spacers fit between the wheel and hub, and require exchanging the existing wheel studs for longer ones (studs are included.)
Product Description
Wider is Better! H&R TRAK+ Wheel Spacers move your wheels and tires outwards so they are more flush with the fender‚ instantly giving your vehicle the perfect stance. High end sports car manufacturers use every millimeter of fender space available in their design for the best looks and highest performance and so should you. With TRAK+ you can fill the gap in your fenders and GO WIDE!
TRAK+ Wheel Spacers are manufactured from a special proprietary alloy specifically developed for H&R that is lighter and has a higher tensile strength than 6061-T6 billet aluminum. H&R TRAK+ Wheel Spacers are hubcentric and feature a full contact hub‚ just like the factory hub‚ for even load force distribution and lateral support.
Additional Note
Depending on model, axle and year, Nissan vehicles have different diameters in the shoulder of the studs. The following list provides notes and measurements of the shoulder studs required for installation. The wheel spacers shown in the catalog will be supplied with shoulder bolts d = 14.25.
Additional Note
These are hub-centric flat disc type spacers which require the factory hub to center the wheels. Please measure the vehicle hub to verify sufficient height will remain to center the wheel after spacer installation.
Additional Note
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel. If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.
