Edelbrock #8010 water pump for 1955-68 SBC passenger cars, 1969-70 350 c.i.d, Corvettes and 1955-72 Light duty Trucks
Specs
- Application: Application Specific
- UPC: 00085347088102
- Thermostat And Housing Included: No
- Mounting Hole Quantity: 4
- Housing Material: Aluminum
- Impeller Material: Powdered Metal
- Installation Warnings: Yes
- Hub Hole Quantity: 6
- Fan Clutch Included: No
- Impeller Vane Quantity 6
- Includes Back Housing: Yes
- Related Cooling Fan Components: No
- Casting Number: 8810
- Warranty 12 Months
- Hub Height: 5.625 in
- Impeller Rotation: Standard
- Outlet Quantity: 1
- Pulley Included: No
- Water Pump Drive Type: V-Belt
Install Notes
- 1969-’76 vehicles (original pump casting #3853692) require the included spacer to be placed between the pump and the alternator bracket; Some applications (original pump casting #364790) require power steering bracket spacer (included); Some vehicles (original pump casting #6263701) require a through hole instead of the threaded hole for the power steering. If this is the case, drill out the threads with a 3/8″ drill bit; Check closely for any interference with drive belts; some filing for clearance may be necessary with some applications; Installation is the same as for original equipment water pumps. Consult service manual for specific procedures, if necessary; CAUTION: Be sure that fan bolts don’t protrude through the hub so far that they hit the water pump housing; NOTE: Removal of backing plate is not recommended, as there are no user serviceable parts in the water pump. If backing plate is removed, use no sealer on O-ring equipped models, and use conventional gasket sealer (not RTV silicone) on gasketed models.
Description and Information
Edelbrock #8010 water pump for 1955-68 SBC passenger cars, 1969-70 350 c.i.d, Corvettes and 1955-72 Light duty Trucks. Provides maximum cooling form the street and the race track. Water pump provide maximum flow, maximum pressure and equal distribution to both sides of the block with 1%.
